20/02/2019

MasterRoc MP 650 : Fiche technique (Octobre 2013)

Features „ „Fast setting time „ „Durable „ „Cost effective „ „Fine particle size „ „Non-hazardous Benefits „ „Excellent penetration in tight joints, fissures and pore spaces ...

  • pdf, 116,27 Kb
20/02/2019

MasterRoc SLP 1 : Fiche technique (Octobre 2013)

Features MasterRoc SLP 1 liquid polymer has been specifically developed for soil conditioning with shielded TBM excavation ... It has excellent performance in restructuring the soil ...

  • pdf, 113,68 Kb
20/02/2019

MasterRoc MP 307CE : Fiche technique (Octobre 2013)

Features „ „Very low viscosity „ „Controlled gel time between 3 and 22 minutes at 68 °F (20 °C) „ „Workable between 41 °F (5 °C) to 104 °F (40 °C) „ „Superior flexibility ...

  • pdf, 124,17 Kb
20/02/2019

MasterRoc MP 303CE : Fiche technique (Octobre 2013)

Features „ „Very low viscosity „ „Controlled gel time between 14 seconds and 3 minutes at 68 °F (20 °C) „ „Workable between 41 °F and 104 °F (5 °C and 40 °C) „ „Good bond strength ...

  • pdf, 143,27 Kb
20/02/2019

MasterRoc SA 160 : Fiche technique (Octobre 2013)

Features „ „Ability to construct thick sprayed concrete linings via layered application during one construction sequence „ „Good early strength development and continual early-age ...

  • pdf, 200,55 Kb
20/02/2019

MasterRoc EPB 11 : Fiche technique (Octobre 2013)

Features „ „Good mechanical stability, load-carrying capacity and corrosion protection Benefits „ „High quality, multi-purpose „ „Suitable for a wide range of plain and rolling ...

  • pdf, 112,60 Kb
20/02/2019

MasterRoc SA 167 : Fiche technique (Octobre 2013)

Features „ „Rapid early strength development for ground support allowing for increased advance „ „Supplied as a liquid, providing easy handling as well as improved dosing accuracy ...

  • pdf, 124,74 Kb
20/02/2019

MasterRoc SLP 2 : Fiche technique (Octobre 2013)

Features „ „Ready-to-use liquid polymer „ „Environmentally preferable Benefits MasterRoc SLP 2 liquid polymer was designed for soil conditioning with shielded TBM excavation ...

  • pdf, 115,41 Kb
20/02/2019

MasterRoc SLF 47 : Fiche technique (Octobre 2013)

Features „ „Based on renewable materials „ „Improves soil plasticity „ „Reduces permeability and increases sealing of the face „ „Creates plastic deformation properties in the ...

  • pdf, 112,19 Kb
20/02/2019

MasterRoc MP 367 Foam : Fiche technique (Octobre 2013)

Features „ „Neither expands its volume with water nor absorbs water „ „Shows good adhesion to wet substrates „ „Good chemical stability „ „Predominant closed foam cells Benefits ...

  • pdf, 331,10 Kb
20/02/2019

MasterRoc ABR 7 : Fiche technique (Octobre 2013)

Features „ „Reduces abrasive wear in cutting tools „ „Reduces dust formation, leading to improved working environment for TBM operators „ „Lowers inner friction and abrasiveness ...

  • pdf, 112,88 Kb
20/02/2019

MasterRoc BSG 1 : Fiche technique (Octobre 2013)

Features and Benefits „ „Excellent sealing properties „ „Excellent anti-washout properties „ „Excellent adhesion to any metal or concrete surfaces „ „Excellent pumping and ...

  • pdf, 111,05 Kb
20/02/2019

MasterRoc AGA 41 : Fiche technique (Octobre 2013)

Features „ „Adjustable setting times „ „Low viscosity Benefits „ „High-early strength „ „Low consumption „ „Easy to mix into grout, even at low temperatures Performance ...

  • pdf, 111,15 Kb
20/02/2019

MasterRoc MP 364 Flex : Fiche technique (Octobre 2013)

Features „ „Neither expands its volume with water nor absorbs water „ „Penetrates cracks wider than 0.006 in. (0.14 mm) „ „Shows good adhesion to wet and low friction substrates ...

  • pdf, 252,11 Kb
20/02/2019

MasterRoc MF 507 : Fiche technique (Octobre 2013)

Features „ „Reduced water content „ „Superior slump retention „ „Optimum setting time „ „Dosage flexibility Benefits „ „Consistency in operations „ „Optimized mixture costs ...

  • pdf, 240,03 Kb
20/02/2019

MasterRoc FLC 100 : Fiche technique (Octobre 2013)

Features When used in the recommended applications, MasterRoc FLC 100 additive produces a thixotropic grout with the following unique properties: „ „Low water-cement ratio ...

  • pdf, 110,72 Kb
20/02/2019

MasterRoc MG 44 LS : Fiche technique (Octobre 2013)

Features „ „Sets quickly „ „Can be used at high water-powder ratios Benefits „ „Offers excellent long term stability „ „Places easily „ „Compresses significantly under load prior ...

  • pdf, 115,86 Kb
20/02/2019

MasterRoc MF 501 : Fiche technique (Octobre 2013)

Features „ „Reduced water content „ „Improved slump and flow characteristics „ „Normal setting time and rate of hardening „ „Reduces pumping and distribution pressures Benefits ...

  • pdf, 109,89 Kb
20/02/2019

MasterRoc MP 355 : Fiche technique (Octobre 2013)

Features „ „When in contact with water, the product forms a rigid foam ... In the absence of water, the product reacts and forms a stiff, rubber-like material „ „Fast-reacting ...

  • pdf, 186,10 Kb
20/02/2019

MasterRoc MF 701 : Fiche technique (Octobre 2013)

Features „ „Reduced water content „ „Controlled setting time characteristics „ „Improved slump and flow characteristics Benefits „ „A longer working and retention time of the fill ...

  • pdf, 109,24 Kb
1 à 20 des résultats 82